Wally, let me know if WK's try is satisfactory, and I'll just wait to see if there's a hi-res version of the backing image. WK, I had some decent results scaling up with bicubic smooth, but I agree that "presents" bit is going to be a problem no matter what. It's just too small.
I started with scaling up with bicubic smooth, but I felt it still didn't look great - so I ran it through a couple of filters: despeckle to reduce some of the artifacts and then diffuse anisotropic to counterbalance some of the smoothing. I still wasn't sure if I liked it - so ran an unsharpen mask and then added some noise back in. Final step was to create an duplicate layer and run a high pass to pull out some of the background detail - I though that would maybe sharpen up some of the text when I blended it back together. I might play with a few of the filter settings to see if I can clean it up a bit more.
That's exactly what i would have done
Is the Catholic priest a Paedophile? how else would you do it
Seriously though WK that’s great work thanks mate.
Wally, let me know if WK's try is satisfactory, and I'll just wait to see if there's a hi-res version of the backing image. WK, I had some decent results scaling up with bicubic smooth, but I agree that "presents" bit is going to be a problem no matter what. It's just too small.
I started with scaling up with bicubic smooth, but I felt it still didn't look great - so I ran it through a couple of filters: despeckle to reduce some of the artifacts and then diffuse anisotropic to counterbalance some of the smoothing. I still wasn't sure if I liked it - so ran an unsharpen mask and then added some noise back in. Final step was to create an duplicate layer and run a high pass to pull out some of the background detail - I though that would maybe sharpen up some of the text when I blended it back together. I might play with a few of the filter settings to see if I can clean it up a bit more.
That's exactly what i would have done
Is the Catholic priest a Paedophile? how else would you do it
Seriously though WK that’s great work thanks mate.
I wouldn't have started with scaling up with bicubic smooth but the rest sounds reasonable
Wally, let me know if WK's try is satisfactory, and I'll just wait to see if there's a hi-res version of the backing image. WK, I had some decent results scaling up with bicubic smooth, but I agree that "presents" bit is going to be a problem no matter what. It's just too small.
I started with scaling up with bicubic smooth, but I felt it still didn't look great - so I ran it through a couple of filters: despeckle to reduce some of the artifacts and then diffuse anisotropic to counterbalance some of the smoothing. I still wasn't sure if I liked it - so ran an unsharpen mask and then added some noise back in. Final step was to create an duplicate layer and run a high pass to pull out some of the background detail - I though that would maybe sharpen up some of the text when I blended it back together. I might play with a few of the filter settings to see if I can clean it up a bit more.
That's exactly what i would have done
Is the Catholic priest a Paedophile? how else would you do it
Seriously though WK that’s great work thanks mate.
I wouldn't have started with scaling up with bicubic smooth but the rest sounds reasonable
Sometimes I go with nearest neighbor instead of smooth, but it depends on what I'm trying to scale.
I started with scaling up with bicubic smooth, but I felt it still didn't look great - so I ran it through a couple of filters: despeckle to reduce some of the artifacts and then diffuse anisotropic to counterbalance some of the smoothing. I still wasn't sure if I liked it - so ran an unsharpen mask and then added some noise back in. Final step was to create an duplicate layer and run a high pass to pull out some of the background detail - I though that would maybe sharpen up some of the text when I blended it back together. I might play with a few of the filter settings to see if I can clean it up a bit more.
That's exactly what i would have done
Is the Catholic priest a Paedophile? how else would you do it
Seriously though WK that’s great work thanks mate.
I wouldn't have started with scaling up with bicubic smooth but the rest sounds reasonable
Sometimes I go with nearest neighbor instead of smooth, but it depends on what I'm trying to scale.
I don't know if I've ever used nearest neighbor. What types of scaling do you find to be effective for?
"They don't think it be like it is, but it do." - Oscar Gamble
If you do want to get this printed out - it is print ready. Ideal size for a poster would be 28"w x 22"h. Most print shops (such as FedEx Office) would just need the PDF to create the poster.
My one caveat is that there is a little risk involved. Until it gets printed out in large scale - there's no way of knowing how good (or bad) it might look. If we were dealing with an image that was originally high resolution I wouldn't worry - but because the original image required a bit of work - I just want to put this out there as a consideration before anyone spends any money getting it printed. I think it should be okay - but just something to think about. Maybe just ask the printer about it before they go ahead and print.
Last edited by WestwayKid on 01 Mar 2019, 11:31am, edited 1 time in total.
"They don't think it be like it is, but it do." - Oscar Gamble
If you do want to get this printed out - it is print ready. Ideal size for a poster would be 28"w x 22"h. Most print shops (such as FedEx Office) would just need the PDF to create the poster.
My one caveat is that there is a little risk involved. Until it gets printed out in large scale - there's no way of knowing how good (or bad) it might look. If we were dealing with an image that was originally high resolution I wouldn't worry - but because the original image required a bit of work - I just want to put this out there as a consideration before anyone spends any money getting it printed. I think it should be okay - but just something to think about. Maybe just ask the printer about it before they go ahead and print.
Thanks, man! But your link doesn't include the decryption key. Mega gives you the option of two links, with and without the decryption key embedded. So you either need the longer link or just add to your post the key. Mega offers that extra security, but its links are less conventional than other services.
"Grab some wood, bub.'" - Richard Nixon, Checkers Speech, abandoned early draft
If you do want to get this printed out - it is print ready. Ideal size for a poster would be 28"w x 22"h. Most print shops (such as FedEx Office) would just need the PDF to create the poster.
My one caveat is that there is a little risk involved. Until it gets printed out in large scale - there's no way of knowing how good (or bad) it might look. If we were dealing with an image that was originally high resolution I wouldn't worry - but because the original image required a bit of work - I just want to put this out there as a consideration before anyone spends any money getting it printed. I think it should be okay - but just something to think about. Maybe just ask the printer about it before they go ahead and print.
Thanks, man! But your link doesn't include the decryption key. Mega gives you the option of two links, with and without the decryption key embedded. So you either need the longer link or just add to your post the key. Mega offers that extra security, but its links are less conventional than other services.
Good to know! I've updated the link - think it should now work.
"They don't think it be like it is, but it do." - Oscar Gamble
If you do want to get this printed out - it is print ready. Ideal size for a poster would be 28"w x 22"h. Most print shops (such as FedEx Office) would just need the PDF to create the poster.
My one caveat is that there is a little risk involved. Until it gets printed out in large scale - there's no way of knowing how good (or bad) it might look. If we were dealing with an image that was originally high resolution I wouldn't worry - but because the original image required a bit of work - I just want to put this out there as a consideration before anyone spends any money getting it printed. I think it should be okay - but just something to think about. Maybe just ask the printer about it before they go ahead and print.
Thanks, man! But your link doesn't include the decryption key. Mega gives you the option of two links, with and without the decryption key embedded. So you either need the longer link or just add to your post the key. Mega offers that extra security, but its links are less conventional than other services.
Good to know! I've updated the link - think it should now work.
Yup—works perfectly. Again, thanks for your efforts!
"Grab some wood, bub.'" - Richard Nixon, Checkers Speech, abandoned early draft
this thread title is the subtext of every thread here
Wiggle, wiggle, wiggle like a bowl of soup
Wiggle, wiggle, wiggle like a rolling hoop
Wiggle, wiggle, wiggle like a ton of lead
Wiggle - you can raise the dead